Fire stopping survey

Before anything gets sealed, someone has to count the holes.

  • Every seal labelled and photographed
  • BM TRADA / FIRAS-certificated contractors
  • Written price before any work
Get a price

We reply with a written price.

We use these details to reply to you. See our privacy notice.

A line in a fire risk assessment such as "fire stopping deficiencies noted in service risers" gives no count and no location. You cannot price sealing from it. A survey turns it into a list.

An open vertical joint running down a blockwork wall from the slab
An open vertical joint running down a blockwork wall from the slab

An example survey day

This one is made up to show the method. A four-storey office building off Southwark Street, two stairs, one lift, a riser beside each stair, a kitchen on every floor. The surveyor arrives at 8am with the floor plans, a torch, a tape, a camera, a short stepladder and a roll of numbered stickers.

Ground floor riser first. Panel off. Sticker 1 on the wall: 6 cables and a 22mm copper pipe through the slab, hole 90 by 70, open to the floor above, photo 1. Sticker 2: an old 40mm hole, empty, cable long gone, photo 2. Then up the riser, floor by floor.

Then the ceilings. Tiles up along the walls round each stair and the lift. On the second floor the data cables for the whole floor go through the stair wall in one ragged hole at the top. Sticker 9. The kitchen extract on the third floor crosses the same wall. Sticker 14, with a note that the duct itself is for the ventilation contractor.

By 3pm there are 31 stickers. Back at the desk each one becomes a row: number, floor, location, what goes through, size, likely seal, photo. The plans get a dot for each number.

Price

The survey is priced after we have seen the plans. Send the number of floors, stairs and risers, and say whether the building is in use. The sealing can then be priced from the rows, by us or by another firm.

Need the holes counted and sealed?

Send the postcode, the type of building and a photo or two. We will tell you whether it needs a survey first and what the sealing is likely to cost.

Call 020 3376 6178Get a quote